Home>Function introduction of commonly used rubber testing equipment

Function introduction of commonly used rubber testing equipment

Edit: John 2020-03-02

  

  1. Tensile machine: test rubber elongation

  2. Aging test box: It can be used for hot air aging test of rubber and plastic products, electrical insulation and other materials to test the accelerated aging results of plastics;

  3. Low temperature brittleness tester for rubber and plastic: it can make a comparative appraisal of the performance of rubber waterstop material under low temperature conditions;

  4. Punching machine: for rubber factory and scientific research unit to punch standard rubber test piece before tensile test;

  5. Cutting knife: It can be used to take samples of the punching machine, which can cut samples such as tensile and tear;

  6. Abrasion tester: perform abrasion tests on rubber materials;

  7, hardness tester: used to determine the hardness of vulcanized rubber and plastic products;

  8. Thickness gauge: used to measure the thickness of vulcanized rubber and plastic products;

  9. Plasticity test: The slicer is used to take a 16mm diameter sample, and then the plasticity test is performed on the plasticity tester;

  10. Compression permanent deformer: used for vulcanized rubber, thermoplastic rubber under normal temperature, high temperature and low temperature conditions, with a certain compression rate, after a certain compression time to determine the amount of rubber deformation;

  11. Impact elasticity testing machine: determine the rebound value of vulcanized rubber with hardness between 30-85IRHD;

  12. Rotorless vulcanizer: It is used to measure the characteristics of unvulcanized rubber and find out the most suitable vulcanization time for the rubber;

  13. Mooney viscometer: used to measure Mooney viscosity, scorch time and fluidization index of various unvulcanized natural rubber, synthetic rubber and recycled rubber